Roofs & Metal Buildings
One of the excellent uses for Ceramic Cover CC Systems 100 is a roof coating. The product forms a radiant heat barrier providing insulation qualities and protection from ultra violent rays. In addition, the ceramic insulating properties keep heat expansion and cold contraction of metal roofs to a minimum, thus, eliminating many causes of water damage, uncomfortable wind drafts or costly maintenance problems.
Ceramic Cover CC Systems 100 may be applied directly
over composites (i.e. tar roofing, asphalt, shingles, paint, etc.) with 100% adhesion and no chemical
adverse effect. Ceramic Cover CC Systems 100 maintains its durability, tensile strength (ASTM
D-882 TENSILE STRENGTH (LB/IN2) 66.7) and elasticity year round passing ASTM G-53
accelerated agin
g test over 200 hours.
Ceramic Cover CC Systems 100 was applied to the dome of a famous restaurant on the harbor in New York, to impede further corrosion, stop water leaks, and provide energy saving insulation. As noted, Ceramic Cover CC Systems 100, may be tinted to color desired, while still maintaining its properties, in this case, the dome was painted white with red stripes.
Case Study #1
At Camp Casey in South Korea, Ceramic Cover CC Systems 100 was applied to Quonset
Huts to stop expansion and contraction thus eliminating corrosion, providing insulating properties. It was applied in lieu of polyurethane foam, which is now considered hazardous waste when removed.
photo: Quonset Hut after 16 mil application of Ceramic Cover CC-Systems 100 and tinting.
Case Study #2
Ceramic Cover CC Systems 100 was applied to public transportation buses resulting in cooler units. According to Georgia Tech testing, Ceramic Cover CC Systems 100 maintains a 99.61 reflectively with only a .039% transmission against radiant heat.
photo: Ceramic Cover CC-Systems 100 reduced under roof temperature by 50 degrees F. An application of 20 mils. was
done to reduce usage of polyurethane
foam.
Ceramic Cover CC System 100
Insulation
Test results have proven that one coat or 20 mil of Ceramic Cover CC Systems 100 eliminates radiant heat and reduces temperature greatly (60ºF to 80ºF degrees) on hot surfaces. Additional coats contribute a reduction in temperature between 40ºF to 45ºF.
Protection from UV Rays
Ceramic Cover CC Systems 100 can be applied directly over composites with 100% adhesion and no chemical adverse effect (i.e. tar roofing, asphalt shingles, paint, etc.) providing protection against UV Rays as well as insulating.
Adhesion
Ceramic Cover CC Systems 100 reaches full adhesive strength prior to final cure. Also based on disbondment within the coating, Ceramic Cover CC Systems 100 shows an actual stronger bond to the substrate surface.
Flame Resistance
Ceramic Cover CC Systems 100 flame spread is rated 5 out of 100 according to Southwest Research Institute, Department of Fire Technology in San Antonio, TX and MSDS sheet reports flash point noncombustible. Therefore, Ceramic Cover CC Systems 100 can be applied directly to hot surfaces in a wide temperature ranging from 34ºF to 400ºF without shut down.
Corrosion Protection
Ceramic Cover CC Systems 100 has no air pockets, therefore it impedes condensation, stops corrosion and has no loss of insulation properties when wet.
Condensation
Ceramic Cover CC Systems 100 has properties that are impervious to the environment such as a fungal-pesticide resistance - rating of 10 on a scale of 1 to 10 (10 being the highest). Additional tests have been administered: wind driven rain, hot/cold cycling, and chemical resistance. In each test and/or analysis, Ceramic Cover CC Systems 100 "tested in the highest percentiles" of available products.
Chemical Resistance
Ceramic Cover CC Systems 100 is an 84% solid latex high density material low in viscosity coating with high insulating properties and chemical resistance.
Chemical Content
Harland Associates Research Lab in San Francisco, CA, reports Ceramic Cover CC Systems 100 as having
0 (zero) grams of volatile organic compounds, (VOC's) less water per liter, and "is a compliant
coating with regard to VOC content requirement of the Bay Area,
Air Quality Management District," one of the strictly controlled air quality management districts in the U.S.A.
Need Adobe Acrobat Reader? 